제품설명

• SuperTrak SX6000은 Storage Server System에 구성된 내장형 RAID Card로써 ltraATA/100 Hard Drive 및 160GB 이상의 HDD를 6개 까지 사용할 수 있는 스토리지 서버를 위한 제품입니다.
  
  
• 본 제품은 RAID 3 & 5를 비롯하여 RAID 0, 1, 0+1 등을 지원하며 Internal i960 RISCprocessor 와 RAID Controller 를 내장하고 32M~128M SDRAM Cache RAM(옵션)을 사용할 수 있습니다.
  

▶ 주요특징

• RAID 레벨 5, 3, 0+1, 1 지원
• 리눅스를 포함한 다양한 운영체제 지원
• Allows up to eight high capacity, high performance, low-cost Ultra ATA drives
• Array Management Software Managers All Components via TCP/IP
• 최대960GB용량 (160GB 6개) 및 Daisy Chain에 의한 용량 증설 가능 

▶ 주요용도

• 대용량 데이터베이스 및 파일 시스템
• 부서 및 회사, 학교용 파일, 데이터 백업용
• 대용량 FTP
• Linux Based NAS System 구성
  

제품 스펙

Controller Type	PCI(v2.2) card with onboard CPU, DIMM slot, 6 independent drive channels, large LBA support
Core I/O Processor	100MHz Intel i960RM with hardware XOR
Cache Memory	Support user-installation of one 168-pin DIMM for ECC/non-ECC SDRAM(16MB min, 128MB max, unbuffered) with dynamically configured cache parameters(writeback/writethrough, flush). NOTE:SuperTrak SX6000 ships without memory pre-installed.
PCI Bus	32bit/33MHz
Ultra ATA/100 Support	Up to six(6) Ultra ATA/100 drives;full compliance with Ultra ATA/100 specification, including CRC error-checking
Drive Type Support	Ultra ATA/100, Ultra ATA/66, Ultra ATA/33
ATA RAID Levels Supported	0, 1, 0+1, 3, 5 and JBOD
RAID Management Utility	Auto-detects failed drive, rebuilds drive data in background; supports SMART-capable drives to predict failures; audiable/visual event alarms; views, creates, and deletes arrays; accessible via Internet; event e-mail notification; monitors optional SuperSwap hot swap enclosures
RAID Stripe Block Size Support	Variable block size (4KB to 64KB) permits better O/S, application-specific performance
RAID Data Handling	Elevator seek, load balancing, hardware scatter-gather engine, and tagged command queuing optimize data retrieval and command execution
Hot Swap & Spare Features	Allows assigning standby hot spare drive for fault tolerent arrays; offers hot swap support when used with optional Promise SuperSwap chassises
Error Handling	Provides Ultra ATA Cyclical Redundant Checking for high-speed data transfer; NVRAM creates write log for data parity coherency; LEDs monitor card, array status
BIOS Feature	Optimizes drive performance by type using Promise Ultra ATA/100 ASIC; auto-configures most RAID arrays; allows for manual array configuration; flashable; boots system from all array levels; 48-bit LBA recognizes drives greater than 137GB
O/S Support	Microsoft Windows 2000/NT4; Redhat Linux 7.0, 7.1; Turbo Linux 6.0, 6.1; Suse Linux 7.0, 7.1; OpenLinux eServer 2.3